Increase Font       Decrease font sizePrint

Design of Bolted and Welded Joints in Steel Structures using Eurocode 3

Event code: 77092


INTRODUCTION
Connections form a very important part of any steel structure and integrity of the structure depends on them. Accurate details and specifications are required for fabrication to ensure trouble-free erection. The course will focuses on connection design specifications as per the SS EN 1993 (Eurocode 3): Part 1-8:Design of joints. Results of recent research on steel connections detailing and fabrication will also be introduced. The course will be taught with practical examples of connection designs which are reliable as well as economical.

OBJECTIVES
This course aims to enable participants to:
• Design bolted and welded connections as well as the combined bolted and welded connections for strength and stiffness;
• Apply methods learned from the course to achieve economy in design, fabrication and erection of steel structures; and
• Avoid common mistakes with lessons learned from case studies and collapse investigations.

CONTENTS
• Overview of Eurocodes
Characterisation and classification of joints
• General information and detailing for bolted connection
Detailing requirements
• Design of Non-preloaded bolts
Requirements for non-preloaded bolts;
Shear resistance; Bearing resistance;
Effect of steel packing;
Effect of long joints; Bolts in tension;
Bolts in shear and tension;
Bolts in  direct shear and torsion;
Block shear tearing
• Design of Preloaded bolts
Methods for tensioning friction-grip bolts;
Slip resistant at ultimate;
Slip resistant at serviceability;
Torque on HSFG bolts
• Simple Connections
Simple beam-to-column connections;
Typical beam-to-beam connections;
Column base connection resisting shear force;
Column base connection resisting compression and shear
• Moment Connection
Rigid beam-to-column connection; Column splice; Various details to achieve rigid and full strength joints
• Code requirements for welded connections
Details of fillet welds; Design of fillet welds;
Simplified method; Directional method; 
Types of butt welds;
Full strength and partial strength butt welds;
Welding of hollow sections; 
Practical examples and case studies

LECTURER
ER PROF RICHARD LIEW - BEng (Hons), MEng, PhD, CEng, PEng, ACPE, StEr
Department of Civil and Environmental Engineering, National University of Singapore

ASSOC PROF PANG SZE DAI
Department of Civil and Environmental Engineering, National University of Singapore


TARGET AUDIENCE
• Structural Practicing Engineers
• Steel Structural Designers
• Consulting Engineers
• Resident Engineers
• Resident Technical Officers
• Specification Writers
• Steel Fabricators
• Contractors
• Academia


AWARD
Certificate of Attendance (COA) will be awarded to participants who meet the attendance requirement.


DETAILS

10th Run: 12 Oct 2018
Duration: 1 day
Time: 9.00am to 5.30pm
Venue: BCA Academy
Fee (incl of GST): S$450.00
Lunch and refreshments will be provided.


CPD POINTS
PEB: Pending
IES-ACES: Pending (Structural) 



To register, please log into our Online StoreFront (OSF) at
https://eservices.bcaa.edu.sg/registration/#/login 
and search for course code 77092




Download brochure here



If you need assistance, please call our customer service hotline: 6248 9999, from 
8.30am to 5.00pm, Monday to Friday.
200 Braddell Rd S579700 • Fax: 6258 0558 • Email: bca_academy@bca.gov.sg • 
www.bcaa.edu.sg

 

TERMS AND CONDITIONS
1) The company and individual applicant has read and understood the terms and conditions. 2) The company and individual applicant warrant that the particulars given are accurate. 3) The Building and Construction Authority (BCA) can disclose to other government agencies any information relating to this application. 4) Payment for the course must be made to BCA before the course commencement date. 5) Any Direct Debit and Direct Credit Authorisation for GIRO applications previously signed and passed to BCA will apply to payments made under this course. 6) BCA reserves the right to accept or reject the application for whatever reason. 7) BCA shall at its discretion allocate a space to the registered applicant, based on availability. 8) BCA reserves the right to amend any details relating to the course, revise the course fees without prior notice, cancel or postpone the course. 9) No deferment is allowed. 10) Request for withdrawal must be made in writing. Requests are subject to approval by BCA and administration fee: Written request for withdrawal that reaches BCA - At least 2 weeks before the course commencement date: 10% of course fee is payable. - Less than 2 weeks but more than 3 working days before the course commencement date: 25% of course fee is payable. - 3 working days or less before the course commencement date: full course fee is payable. 11) No Replacement is allowed for funded participants. 12) The Continuing Professional Development (CPD) points indicated for any course offered by BCA is subject to change and final approval by the relevant professional accreditation bodies. 13) Funding and subsidies offered by BCA or third party organisations for the courses are subject to approval. The company must make the application for funding and subsidies. BCA is not to be held liable and the company agrees to pay BCA the applicable funding amount if funding and subsidies are either granted at a reduced amount, not granted at all or if funding is revoked, for whatever reason. 14) All information, materials, services, intellectual property and other property and rights provided by BCA during the course are provided on an “as is” basis. BCA makes no warranties of any kind, either express or implied, as to any matter, and all such warranties, including warranties of merchantability and fitness for a particular purpose, are expressly disclaimed. 15) The materials supplied to the company and individual applicant for the course (“Materials”) are for their personal reference only and the company and individual applicant is not supposed to otherwise use the Materials. The company and individual applicant shall defend and indemnify BCA and its officers, employees and agents from and against any and all liability, damage, loss or expense (including reasonable attorneys’ fees and expenses) imposed upon BCA in connection with any claim arising out of the company and individual applicant’s use of the Materials. 15) Re-assessment fee is applicable for those who are required to re-take the assessment. 16) I consent to BCA, BCA Academy, and BCA’s employees contacting me via my contacts (including email addresses and mobile numbers) to market future courses, seminars, conduct surveys, circulate publications (i.e. magazines, periodicals etc). If you wish to withdraw your consent to any use or disclosure of your personal data as set out above, you may contact us. PLEASE NOTE: All correspondence and notices addressed to BCA are to be sent to BCA Academy. Photographs of attendees will be taken at the event for our publicity materials, newsletters and other publications.

Sign Up for Updates

To keep yourself updated with BCA news and happenings, sign up with us TODAY!

You might also consider these courses

Top